ASi Support

Logout

General Information

ASi provides multiple fault and warning indicators for protection during development, ensure operator safety and in order to maximize an eBike system’s life span . Presently 2 fault and 1 warning register can be used to protect against and diagnose most issues.

 

Fault Registers: These bits will disable a motor and flash the internal led. See next sections for the faults which can be configured.

Name Description Units Address
258
299

 

Warning Registers: Could indicate outputs power is being reduce towards 0. See Limiters and Foldbacks sections for configuration

Name Description Units Address
warnings 7 6 5 4 3 2 1 0 1=active 0=not active
bit 0: Communication Timeout (flash code 5,1)
bit 1: Hall Sensor (flash code 5,2)
bit 2: Hall stall (flash code 5,3)
bit 3: Wheel Speed Sensor(flash code 5,4)
bit 4: CAN Bus (flash code 5,5)
bit 5: Hall Illegal sector (flash code 5,6)
bit 6: Hall illegal transition (flash code 5,7)
bit 7: VdcLowFLDBK (flash code 5,8)
bit 8: VdcHighFLDBK (flash code 6,1)
bit 9: MotorTempFLDBK (flash code 6,2)
bit 10: ContrlTempFLDBK (flash code 6,3)
bit 11: LowSOCFLDBK (flash code 6,4)
bit 12: HiSOCFLDBK (flash code 6,5)
bit 13: I2tFLDBK (flash code 6,6)
bit 14: (flash code 6,7)
bit 15: BMSTimeout(flash code 6,8)
277

 

Last Fault Registers:  help to capture previous events such as self clearing faults

Name Description Units Address
269
418

 

Smart, silent, smooth.

Try an Evaluation Kit

Responsive Menu Pro Image Responsive Menu Clicked Image